LCD/Sound menu [LCD/Sound Menu]
Turning beeping sound on/off
[Beep]
The voice recorder makes beeping sounds
when buttons are pressed, or to warn in case
of operation errors. You can select whether
the voice recorder makes these beeping
sounds.
[On]:
Enables beeping sounds.
[Off]:
Disables beeping sounds.
Inverting the colors of the display
[Invert colors]
If the display dazzles you and you feel it is
hard to view, try inverting the colors.
[Normal]:
The display is normal.
[Invert]:
Inverts the colors of the display.
Setting the backlight [Backlight]
The display backlights are switched on for
a preset amount of time when a button
operation is performed.
[5 sec.], [10 sec.], [30 sec.], [1 min.]:
Set the amount of time that the
backlight stays lit.
[Off]:
Disables the backlight.
Setting the LED indicator light
[LED]
You can set the LED indicator light to not
become lit.
[On]:
LED indicator light is switched on.
[Off]:
LED indicator light stays off.
TIP
• Even if you set the [LED] setting to
[Off], the LED indicator light will
flash while files are being transferred
between the voice recorder and a PC.
To Next Page
Loading...
