Olympus DS-2 - Auto Backspace Review (BACK SPACE)

44
4
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
2
Press the 3 or 2 button to choose
“BACK SPACE”.
3
Press the MENU/SET button.
The auto backspace review setup
process begins.
4
Press the 3 or 2 button to choose
from “OFF”, “1 SEC SKIP” and “2
SEC SKIP”.
OFF: Continuous playback.
1 SEC SKIP: Start playback from 1
second before.
2 SEC SKIP: Start playback from 2
second before.
5
Press the MENU/SET button to
complete the setup screen.
6
Press the STOP button to close
the main menu.
7
Press the REW button while the
file is being replayed.
Playback starts at the set point of
seconds before.
2,4
1,3,5
7
6
Auto Backspace Review (BACK SPACE)
To ease the reviewing of a voice file you can set an auto backspace for either 1 or 2 seconds,
so you will listen to the last phrase repeatedly.
Auto Backspace Review (BACK SPACE)
....................................................................................................................................................
Note
If “1 SEC SKIP” or “2 SEC SKIP” is set at the previous playback, and even though the fast forward button is
pressed, it does not reverse skip to the cue or the index mark position. Reverse skip is executed for only the
set time (1 or 2 seconds).