Olympus DS-2 - System Sounds (BEEP)

60
5
1,3
2,4
5
System Sounds (BEEP)
The recorder beeps to alert you to button operations or warn you of errors. System sounds
may be turned off.
System Sounds (BEEP)
1
Press the 3 or 2 button in the
sub menu screen, and select
the “BEEP”.
See ☞ P.17 and 19 regarding the sub
menu.
2
Press the MENU/SET button.
The system sound setup process
begins.
3
Press the 3 or 2 button to
choose between “ON” and
“OFF”.
ON: System sounds are enabled.
OFF: System sounds are disabled.
4
Press the MENU/SET button
to complete the setup screen.
5
Press the STOP button to close
the sub menu.
....................................................................................................................................................
Note
If the alarm playback function has been set, the alarm will sound at the scheduled time even if system
sounds are turned off.