10
1
EN
Power supply from USB cable or AC adapter
Use the AC adapter or USB cable when recording for
extended period of time.
The docking station and AC adapter are sold
separately.
Use the USB cable
1 Verify that the recorder is in stop mode.
2 Connect the USB cable to the recorder.
Detecting abnormal voltage
If the recorder detects a DC power voltage
outside the allowed voltage range (4.4-5.5V),
then [Power supply error Remove power
plug] will appear on the display, and all
operation will stop. The recorder will not be
operable if abnormal voltage is detected. Use
the AC adapter.
Power supply from USB cable or AC adapter
Use the AC adapter
Plug the AC adapter into a household power outlet
and connect the power plug to the recorder via the
docking station. Always turn off the recorder before
you connect power.
To Next Page
Loading...
