2
23
EN
Erasing
Erasing
Erasing files
A selected file can be erased from a folder. Also, all
files in a folder can be erased simultaneously.
1 Select the file you want to erase.
2 Press the k (erase) button.
3 Press the + button to select
[Erase all] or [Erase one file].
[Erase all]:
All files in a folder can be erased
simultaneously.
[Erase one file]:
Erase one file.
4 Press the OK/MENU button.
5 Press the + button to select [Start],
then press the OK/MENU button.
• The display changes to [Erasing] and erasing
will start.
• [Erased] is displayed when the file is erased.
NOTE
• An erased file cannot be restored.
• The erasing process may take up to 10 seconds.
Do not interrupt this process or data may be
damaged.
• Files cannot be erased in the following cases.
- Files are locked (☞ P. 29).
- Files stored on a locked memory card.
Partially erasing a file
Any unnecessary part of a file can be erased.
1 Playback the file you would like to
partially erase.
2 Press the k (erase) button at the point
you want to start erasing.
• While playback continues, [Start point] will
appear on the display.
3 In the position you want to end partial
erase, press the k (erase) button again.
• The erase starting point (time) set in step 2
and the ending point (time) set in this step
will be displayed alternatively for 8 seconds.
• If you let the playback continue until the end
of the file, that will be considered the ending
point of the partial erase.
4 Press the k (erase) button to confirm
the erasure.
• The display changes to [Partial erasing] and
erasing will start.
• When [Partial erase completed] appears on
the display, partial erase is complete.
To Next Page
Loading...
