Olympus DS-2600 - Technical Specifications; General Specifications; Frequency Response Details

47
5
EN
Specications
Specifications
General points
4 Recording format
DS2 (Digital Speech Standard Pro)
Linear PCM (Pulse Code Modulation)
MP3 (MPEG-1 Audio Layer3)
4 Storage
Internal NAND FLASH memory: 2 GB
SD/SDHC card: Supports 4 GB to 32 GB
* Some recording media memory capacity is used as a
management area, so the actual usable capacity will
always be slightly less than the displayed capacity.
4 Sampling frequency
DSS format
DSS Pro QP 16 kHz
DSS Pro SP 12 kHz
PCM format
22.05kHz Stereo 22.05 kHz
22.05kHz Mono 22.05 kHz
MP3 format
128kbps Stereo 44.1 kHz
64kbps Mono 44.1 kHz
4 Display
Size: 2.4 inches
Resolution: 240 × 320 pixels
Type: TFT color LCD
4 Speaker
Built-in 11 × 15 mm dynamic speaker
4 Maximum working output
320 mW (8 Ω speaker)
4 Maximum headphone output
â 150 mV (conforms to EN 50332-2)
4 MIC jack
ø 3.5 mm impedance 2 kΩ
4 MIC jack
ø 3.5 mm impedance 8 Ω or more
4 Power source
Standard voltage: 3.6 V
Battery: Lithium-ion battery (LI-92B)
External power supply: USB connection,
AC adapter (A517, F-5AC) (DC5V)
4 External dimensions
120.8 mm × 49.8 mm × 18.6 mm
(Not including largest projection)
4 Weight
116.5 g (including battery)
4 Operating temperature
During operation: 0 °C to 42 °C (32 °F to 107.6 °F)
Charging: 5 °C to 35 °C (41 °F to 95 °F)
Overall frequency response
4 When recording from microphonejack
DSS format
DSS Pro QP 200 Hz to 7000 Hz
DSS Pro SP 200 Hz to 5000 Hz
PCM format
22.05kHz Stereo 50 Hz to 8000 Hz
22.05kHz Mono 50 Hz to 8000 Hz
MP3 format
128kbps Stereo 50 Hz to 15000 Hz
64kbps Mono 50 Hz to 13000 Hz
4 When recording with built-in microphone
50 Hz to 15000 Hz
(The upper and lower limit values of the
frequency response depend on each recording
format and microphone mode.)