Olympus DS-2600 - LCD and Sound Settings; LCD;Sound Menu Options

30
3
EN
Menu items
Menu items
Level meter (varies
according to the sound
volume being recorded)
Adjust the start/stop actuation
level:
While the recorder is in recording mode,
press the
9 or 0 button to adjust the
actuation level.
• The VCVA level can be set to any of 15 different
values.
• The higher the value is, the more sensitive the
recorder can react to sounds. At the highest
value, even the faintest sound will activate
recording.
• The VCVA actuation level can be adjusted
according to the ambient (background) noise.
Start level (moves to the
right/left according to the
set level)
• The start/stop actuation level also varies
depending on the selected microphone
sensitivity mode (☞ P.29).
• To ensure successful recordings, prior testing and
adjustment of the start/stop actuation level is
recommended.
LCD/ Sound menu
Backlight
By default, the display will remain lit for about
10 seconds when a button on the recorder is
pressed.
1 Select [Lighting time], [Dim light time]
or [Brightness].
2 Select the options.
When [Lighting time] is selected:
[5 seconds] [10 seconds] [30 seconds]
[1minute] [2minutes] [5minutes]:
Set the backlight duration.
When [Dim light time] is selected:
[30 seconds] [1 minute] [2 minutes]
[5 minutes] [Always On]:
Set the time after which the backlight dims.
When [Brightness] is selected:
[01] [02] [03]:
Sets the brightness of the backlight when lit.
LED
You can set it so the record indicator light does not
turn on.
[On]:
LED light will be set.
[Off]:
LED light will be canceled.
Beep
When the Beep is set to other than [Off], the
recorder will beep in case of error.
[Volume 3] [Volume 2] [Volume 1]:
Beep is enabled. The higher the number is, the
louder the volume.
[Off]:
Beep is disabled.