38
5
EN
Alarm message list
Alarm message list
Message Explanation Action
[Battery low] The remaining battery power is low.
Charge the battery (☞ P. 8).
[
Power supply error
Remove power plug
]
Voltage outside of the allowable limit has been
detected.
Use the dedicated AC Adapter (☞ P.10).
[File locked] Editing or deleting the file is not possible.
Unlock the file (☞ P. 29).
[Further marking not
possible]
The maximum number of Index marks has been
reached (max 32 Index marks per file).
Erase index marks that are no longer required
(☞ P. 26).
[Memory full] No remaining memory.
Erase unnecessary files or insert another
memory card (☞ P.12, P.23).
[Folder full]
The maximum number of files has been reached
(max 200 files per folder).
Erase unnecessary files (☞ P. 23).
[Erasing error] An error occurred while erasing.
Erase once again. When an erase error occurs,
format the memory card (☞ P. 32).
[Card error] The memory card was not recognized correctly.
Remove and insert the memory card again
(☞ P.12).
[Format error] A formatting problem occurred.
Format again (☞ P. 32).
[Memory error] An internal memory error occurred.
Contact the Olympus Customer Support Center
(☞ back cover).
[Insert SD card] The recorder cannot find the memory card.
Insert a memory card (☞ P.12).
[Switch position error] The position of the slide switch is incorrect.
Align the slide switch with the correct position
(☞ P.15).
[Can't create the system
file. Erase unnecessary
file via PC.]
The management file cannot be created due to
insufficient space on the memory card.
Connect the recorder to a computer and delete
unnecessary files.
Other information
To Next Page
Loading...
