2
16
EN
Recording
Basic operations
By default, the recorder has five folders, [A], [B],
[C], [D], [E]. These five folders can be selectively
used to distinguish the kind of recording. Up to 200
messages can be recorded per folder.
Record function
Before starting recording over a previously
recorded file, the RECORD function can be set to the
following:
• Append: Attaches the new recording to the end
of the previously recorded file (☞ P.17 ).
• Overwrite (default): Overwrites and deletes part
of the previously recorded file starting from the
chosen position (☞ P.18).
• Insert: The recorded file will be inserted in the
middle of the previously recorded file, starting
from the chosen recording position. The original
file will be kept (☞ P.19).
By default, the RECORD function is configured to
record using the overwrite option.
Recording will start from the current position of the
existing file.
NOTE
• Append recording, overwrite recording, and
insert recording are not available for MP3 files.
Recording
Recording related settings
Recording related settings can be configured
to provide a suitable recording environment.
• Recording monitor (☞ P.20).
• Microphone mode [Mic mode] (☞ P. 29).
• Microphone sensitivity [Mic sense] (☞ P.29).
• Recording modes [Rec mode] (☞ P. 29).
• Using the Variable Control Voice Actuator
[VCVA] (☞ P. 29).
To Next Page
Loading...
