31
3
EN
Menu items
Menu items
Language
You can set the language for the recorder’s user
interface.
[Čeština] [Dansk] [Deutsch] [English] [Español]
[Français] [Italiano] [Nederlands] [Polski]
[Русский] [Svenska]:
• The languages available may vary depending
on the country/region where the product is
purchased.
Device menu
Device Information
The currently set recording mode, microphone
sensitivity, and VCVA are indicated by icons, and
you can also check [Mic mode], [Internal memory],
[SD card] (when a SD card is inserted), [Model],
[Version], and [Serial No.].
Memory select
When there is a SD card (sold separately) in the voice
recorder, you can select whether to record on the
internal memory or on the SD card.
• The recording media ([
] or [
]) will appear
on the display.
Power save
By default, the recorder will enter into Power Save
mode if not used for more than 10 minutes.
[5 minutes] [10 minutes] [30 minutes] [1 hour]:
Set the length of time before the recorder will
enter into Power Save mode.
[Off]:
Disables this function.
• If any button is pressed, time count will restart.
Time & date
Setting the time and date beforehand enables
easier file management.
For details, see “Setting time and date [Time & date]”
(☞ P.13).
USB class
You can set the USB class of this recorder with a USB
connection to [Composite] or [Storage Class].
[Composite]:
In the 3 classes of Storage, USB audio and human
interface device, USB connection is possible.
While connected via USB in [Composite], the
recorder can be used as the USB speaker and the
USB microphone in addition to storage class.
[Storage Class]:
USB connection is possible in only storage class.
Reset settings
To reset the menu settings to their default values
use [Reset settings] under [Device menu].
Format
Memory cards that have been used in non-Olympus
devices, or memory cards that are not recognized by
the recorder, must be formatted before they can be
used with the recorder.
• Formatting the memory card will erase all the
stored data, including locked files.
For details, see “Formatting the memory card
[Format]” (☞ P. 32).
To Next Page
Loading...
