12
1
EN
Memory card
Memory card
Inserting and ejecting a memory card
Inserting a memory card
Insert the memory card fully into the card
slot with the card facing the direction
shown in the illustration below, until it
clicks into place.
• Insert the memory card keeping it straight.
Memory card recognition
After inserting memory card, the message [SD
card selected] will flash on the display while
the recorder recognizes the memory card.
Ejecting a memory card
Push the memory card inward to unlock it
and let it come out of the slot.
• Hold the memory card straight and pull it out.
NOTE
• Inserting the memory card the wrong way or
at an angle could damage the contact area or
cause the memory card to jam.
• If the memory card is not inserted all the
way into the slot, data may not be written
properly.
• When an unformatted memory card is inserted
into the card slot, the recorder will automatically
display the format menu options (☞ P. 32).
• Use only memory cards formatted with the
recorder (☞ P. 32).
• Never remove the memory card while the
recorder is operating, as this may damage the
data.
• After pushing the memory card inward to eject it,
releasing your finger too quickly may cause the
memory card to be ejected unexpectedly.
• The recorder may not properly recognize the
memory card even when that memory card is
compatible with it.
• The processing performance reduces in a
memory card when you repeat writing and
deleting. In this case, format the memory card
(☞ P. 32).
To Next Page
Loading...
