111
EN
9
Customizing your camera
To calibrate the level gauge:
j g“LEVEL ADJUST” (P. 120)
To easily turn on and off the level gauge:
j By registering [LEVEL GAUGE] to the < button, P button or (preview) button, you can
press the that button to display or hide the level gauge. g“BUTTON FUNCTION” (P. 106)
x Notes
• If the camera is tilted forward or backward to a large degree, the error of the horizontal titling
increases.
4 h TIMER (Auto power off)
You can set the camera to turn off automatically if not operated for 4 hours. It will not turn off
if this is set to [OFF].
PICTURE MODE SETTINGS
When selecting the picture mode, you can skip the items that have not been set to [ON].
Custom MenuV EXP/e/ISO
EV STEP
You can select the EV step for exposure parameter setting, such as shutter speed, aperture
value, or exposure compensation value, from [1/3EV], [1/2EV], or [1EV].
METERING gP. 46
Select the metering method.
AELMetering
You can set the metering mode when pressing the AEL/AFL button to lock the exposure.
• [AUTO] performs metering in the mode selected under [METERING].
ISO STEP
You can select the EV step of the ISO sensitivity from [1/3EV] or [1EV].
ISO-AUTO SET
You can set the upper limit and default ISO values when ISO is set to [AUTO].
[HIGH LIMIT]
This sets the upper limit of the ISO value that automatically changes. The upper limit
can be set from 200 to 6400 in 1/3 EV increments.
[DEFAULT]
This sets the value to be normally used when the optimum exposure can be obtained.
The value can be set from 200 to 6400 in 1/3 EV increments.
TIPS
s0033_e_00_0_unified.book 111 ページ ２０１０年１１月１６日 火曜日 午後５時２４分
To Next Page
Loading...
