112
EN
Customizing your camera
9
ISO-AUTO
You can set the shooting mode in which the ISO [AUTO] setting is activated.
[P/A/S]
The [AUTO] setting is activated in all shooting modes except M and BULB mode.
When [AUTO] is selected in M mode, ISO 200 is set.
[ALL]
The [AUTO] setting is activated for other than BULB mode. The ISO is automatically
selected to obtain the optimal ISO even in M mode.
BULB TIMER
You can select the maximum time (in minutes) for bulb shooting.
ANTI-SHOCK z
You can select the interval between fully pressing the shutter button and releasing the shutter
to be anywhere from 1/8 to 30 seconds.
This diminishes camera shake caused by vibrations. This feature is useful in situations such
as microscope photography and astrophotography.
x Notes
Anti-shock is added to the shooting functions individually (single-frame shooting, sequential
shooting, self-timer shooting and remote control shooting).
g“Sequential shooting” (P. 59)
Custom MenuW # CUSTOM
#X-SYNC.
You can set the shutter speed that will be used when the flash fires. The speed can be set
from 1/60 to 1/250 in 1/3 EV increments.
#SLOW LIMIT
You can set the slow limit of the shutter speed that will be used when the flash fires. The
speed can be set from 30 to 1/250 in 1/3 EV increments.
• When [AUTO] or [REDEYE] is set, the synchronous speed is limited to 1/30 second even
when the slow limit is set to slower than 1/30 second.
w+F
When set to [ON], it will be added to the exposure compensation value and flash intensity
control will be performed.
s0033_e_00_0_unified.book 112 ページ ２０１０年１１月１６日 火曜日 午後５時２４分
To Next Page
Loading...
