Olympus E-5 - Playback Functions; Single-Frame;Close-Up Playback

86
EN
Playback functions
7
7 Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting. g“REC VIEW” (P. 99)
1 Press the q button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2 Use bd or k to select images you want to view.
You can also turn j to switch to U for close-up
playback.
• You can switch the operations of both dials. gP. 104
Single-frame/Close-up playback
q button
INFO button
p
< button
j
[4032x3024,1/8]
[4032x3024,1/8]
2010.09.01
2010.09.01
21:56
21:56
100-0015
100-0015
15
15
L
N
N
15
15
15
JPEG
R
m
JPEG EDIT
P
SETBACK
Press bd to view frame-
by-frame close-ups.
When [g FACE DETECT]
is set to [ON], press ac
to move to another face in
close-up position.
Press p to move the display
of the close-up position.
When [g FACE DETECT]
(gP. 38) is set to [ON], a
frame is displayed around a
detected face. Press i to
move the frame to another
face.
Press p to change the
close-up position.
(Single-frame
playback)
(Close-up frame-by-frame playback)
d : Displays the next frame
b : Displays the previous frame
(Close-up position playback)
(Close-up playback)
• To exit the playback mode, press the
q button again.
• Pressing the shutter button halfway
resumes the shooting mode.
Press the < button
• Plays back the image at a 10×
magnified close-up position.
• The menu for the displayed
image type is displayed.
ibutton
INFO
INFO/Fn
INFO/Fn
U
G
Fn
s0033_e_00_0_unified.book 86 ページ ２０１０年１１月１６日 火曜日 午後５時２４分