105
EN
Connecting the camera to a computer
6
Things you can do with OI.Share
Synchronize the time and date on your camera with your
smartphone
Synchronize the time and date on your smartphone and camera to allow position
information to be added to images on your camera. Start time synchronization in
OI.Share.
• It may take a minute or so for the camera time to synchronize.
Adding smartphone position information to images
1
Start position information recording in OI.Share.
• Your smartphone will log position information at a predetermined interval.
2
End the connection.
• The camera is now ready for shooting.
3
Stop position information recording in OI.Share when position
information is no longer required.
4
Start [Connection to Smartphone] in your camera.
5
Start sending position information in OI.Share.
• The position information will be added to images on the memory card. g is displayed
on images to which position information has been added.
# Cautions
• Position information cannot be added to movies.
Sharing images
To share images, set a [Share Order] on the images you wish to share.
1
Playback images and set [Share Order] (P. 48).
2
Use [One-Time] to set up a Wi-Fi connection.
Operating the camera
You can shoot pictures with the camera by performing operations on your smartphone.
This function is only available when connected with [Private].
1
Start [Connection to Smartphone] in your camera.
• You can also connect by touching w on the shooting screen.
• The camera is set to i-AUTO.
2
Shoot pictures using your smartphone.
# Cautions
• Log position information is only available when using a smartphone with a GPS
function.
• Not all camera functions are available over the wireless LAN connection.
To Next Page
Loading...
Need help?
General
