41
EN
Basic operations
2
Face priority AF/pupil detection AF
The camera detects faces and adjusts focus and digital ESP.
1
Press the P button (H) to display the AF target.
2
Press the INFO button.
• You can change the AF target selection method.
3
Use HI to select an option and press Q.
ii
o
J
Face Priority Off Face priority off.
I
Face Priority On Face priority on.
K
Face & Eye Priority On
The autofocus system selects the pupil of the eye
closest to the camera for face-priority AF.
L
Face & R. Eye Priority On
The autofocus system selects the pupil of the eye on
the right for face-priority AF.
M
Face & L. Eye Priority On
The autofocus system selects the pupil of the eye on
the left for face-priority AF.
4
Point the camera at your subject.
• If a face is detected, it will be indicated by a white
border.
5
Press the shutter button halfway to focus.
• When the camera focuses on the face in the white
border, the border will turn green.
• If the camera is able to detect the subject’s eyes, it will
display a green frame over the selected eye.
(pupil detection AF)
6
Press the shutter button the rest of the way down to
shoot.
L
N
01:02:0301:02:03
10231023
250250 F5.6
P
ii
0.00.0
ISO
200
HD
L
N
01:02:0301:02:03
10231023
250250 F5.6
P
ii
0.00.0
ISO
200
HD
# Cautions
• Face priority applies only to the fi rst shot in each sequence taken during sequential
shooting.
• Depending on the subject and the art fi lter setting, the camera may not be able to correctly
detect the face.
• When set to [p (Digital ESP metering)], metering is performed with priority given to
faces.
$ Notes
• Face priority is also available in [MF]. Faces detected by the camera are indicated by
white frames.
To Next Page
Loading...
Need help?
General
