Olympus EVIS EXERA III - SET UP INSTRUCTIONS FOR UCR:; ENDOSCOPIC CO² REGULATION UNIT

SET UP INSTRUCTIONS FOR UCR:
ENDOSCOPIC CO² REGULATION UNIT
1. Fill sterilised water bottle (MAJ-902-complete set) to maximum level (denoted by upper
line on the bottle) line with “Water for Irrigation”. Ensure the green rubber “O” ring is in
place on neck of bottle.
2. Screw the lid (MAJ-1025- lid) firmly onto the water bottle.
MAJ-902 - CO² water bottle (lid has an
additional port to connect CO² tubing)
MAJ-1742 - Low Flow Gas Tubing
MAJ-1741 - High Flow Gas Tubing
Water bottle-
side connector
Instrument-side
connector