Olympus EVIS EXERA III - TO INPUT PATIENT INFORMATION FOR A LIST

TO INPUT PATIENT INFORMATION FOR A
LIST
• Press the number “1” key = “PATIENT MENU”
• Press the “E” key = “EDIT”
• Press the “I” key = “INPUT”
• The “CURSOR” moves to the first box (highlighted in green). Press the ‘ENTER” key to
select the box and open it.
• Input patient’s MRN number then use the “DOWN ARROW” to move to the next input
line.
• Input patient’s Name and then the “DOWN ARROW” or the “ENTER” key to move to the
next input line.
• Once all the required information in recorded, use the “DOWN ARROW” to the bottom of
the window to select the ‘NEXT Icon and press “ENTER”
• A confirmation message will appear on the screen. If you wish to save the recorded
message, press the “ENTER” key and a new box opens to record the next patient’s
information.
• Repeat the above steps for each patient’s on the Procedure List information has been
recorded. After the last patient’s information has been entered, press the “MENU” key.
• A confirmation window appears to confirm the information recorded. Press the “ENTER”
to confirm and the window closes.
• Press the “ESCAPE” key to go back to the “PATIENT MENU”.
• Press the “S” key = “SELECT”. This moves the cursor to the left hand side column and
highlights the first Patient Information. Use the “DOWN ARROW” to the required patient
information followed by the “ENTER” key. The windows will close and the entered
patient’s information will appear of the top left hand side of the monitor.
Press the “MENU” key to open the
Menu Options window
QR 07.281 V1.0 November 2019
For complete product details see Instructions for Use.
OLYMPUS AU
STRALIA
PTY LTD
3 Acacia Place, Notting Hill VIC 3168, Australia
Customer Service: 1300 132 992 | www.olympusaustralia.com.au
OLYMPUS NEW ZEALAND LIMITED
28 Corinthian Drive, Albany, Auckland NZ 0632
Customer Service: 0508 659 6787 | www.olympus.co.nz