Olympus EVIS EXERA III - 2. EEIII Cheat sheets 2017 - Scopes; SET UP - 190 SERIES LIGHT SOURCE AND PROCESSOR WITH 180 SERIES BRONCHOSCOPES

SET UP - 190 SERIES LIGHT SOURCE AND
PROCESSOR WITH 180 SERIES
BRONCHOSCOPES
1. Ensure plug end (electrical connector) of endoscope (on the light guide connector of the
endoscope) is dry before plugging into light source
2. Connect suction valve and biopsy cap to bronchoscope. Align the white line on the
scope with the arm of the suction valve, and press down until you feel/hear a click.