SET UP - 190 SERIES LIGHT SOURCE AND
PROCESSOR WITH 190 SERIES
BRONCHOSCOPES
1. Ensure plug end (electrical connector) of endoscope (on the light guide connector of the
endoscope) is dry before plugging into light source.
2. Connect suction valve and biopsy cap to bronchoscope. Align the white line on the scope
with the arm of the suction valve, and press down until you feel/hear a click.
3. Insert One Touch Connector into light source socket
with “White Dot” facing upwards. Insert until “White
Dot” disappears and a “clicking sound” is heard.
To Next Page
Loading...
