10. After “While Balance complete” appears on the monitor; press the “Mode” button on the
processor to illuminate the NBI Light. Press and hold down the “White Balance” button until
you hear a beep and the words “NBI White balance complete” appear on the monitor
11. Test air, water and suction are working properly
12. System now ready for use
QR 07.281 V1.0 November 2019
For complete product details see Instructions for Use.
OLYMPUS AU
STRALIA
PTY LTD
3 Acacia Place, Notting Hill VIC 3168, Australia
Customer Service: 1300 132 992 | www.olympusaustralia.com.au
OLYMPUS NEW ZEALAND LIMITED
28 Corinthian Drive, Albany, Auckland NZ 0632
Customer Service: 0508 659 6787 | www.olympus.co.nz
To Next Page
Loading...
