183
Chapter 10 Specifications
Base unit
Mode of installation Can be placed either on its side or on its base.
Portability Can be fitted to body with a shoulder strap.
Holding of control unit Provided with a hook for temporary locking of
the control unit.
LCD All-around Adjustable brightness
LCD on and off is synchronized with on/off
action of the base unit. LCD can also be turned
on or off by itself.
A sunshade protects the screen when it is
closed.
It can be attached and removed from the base
unit with holding screws.
TV format Each unit is designed exclusively for either
NTSC or PAL.
LCD panel TFT full color liquid crystal display panel module.
Transparent panel
6.5 inch image size
Anti-reflective type
Function of buttons POWER: Turns power ON/OFF
LIGHT : Short push turns illumination ON/OFF.
Long push increases light emission.
Indicator POWER indicator: Indicates power is on or off.
LIGHT indicator : Indicates illumination light is
on or off.
Scope screen Full screen
Bright adjustment 9 steps each.
High speed electronic shutter and
exposure range
NTSC: 0.5 to 1/30000 second
PAL : 0.5 to 1/25000 second
Freeze frame (still image display) Automatically selects frame freeze when there is
little motion in the screen or field freeze when
there is a lot of motion in the screen. However,
the still images obtained with the stereo adapter
are always frame images.
Noise reduction Two settings to reduce static interference in
images.
To Next Page
Loading...
