9
Operating environment features
The operating environment performance is confirmed by the following tests
(United States Defense Standard) under battery operation.
Note, however, that meeting operating environment specifications does not
constitute any guarantee against damage to or malfunction of this equipment.
Also, subjecting this equipment to strong shock or impact may cause the
equipment to no longer meet operating environment specifications.
Be sure that you fully understand the contents of “Dangers, warnings and
cautions” (page 5) and all the precautions in each section of this manual before
using this equipment.
CAUTION
• The included accessories (e.g. charger) do not offer these features.
NOTE
• The United States Defense Standard, often called a military standard, or “MIL-STD”, is used
to help achieve standardization objectives by the U.S. Department of Defense.
Vibration MIL-STD-810F, Method 514.5, Procedure I (General vibration
Test)
Shock (*1) MIL-STD-810F, Method 516.5, Procedure IV (Transit drop Test)
Water Resistance
(*2)
MIL-STD-810F, Method 506.4, Procedure I (Rain and blowing
rain Test)
Humidity MIL-STD-810F, Method 507.4,
Salt Fog MIL-STD-810F, Method 509.4,
Sand and Dust (*2) MIL-STD-810F, Method 510.4, Procedure I (Blowing dust Test)
Explosive
Atmosphere
MIL-STD-810F, Method 511.4, Procedure I, (Operation in an
explosive atmosphere Test)
Icing / Freezing
Rain
MIL-STD-810F, Method 521.2
Electromagnetic
Interference (EMI)
MIL-STD-461E, RS-103, (Radiated susceptibility Test for Non-
Metallic below deck shipboard conditions)
*1 In case that the LCD monitor is folded down into the main body in the carrying and
transport position. In such a case, the LCD monitor is susceptible to be damaged.
*2 This equipment meets IP55 specifications for dust and water resistance.
To Next Page
Loading...
