53
Chapter 3 Preparation and inspection before observation
4-mm type
6.2-mm type (for IV8635X1)
2 Turn the optical adapter nut clockwise until the first screw thread
passes over the connecting screw thread.
3 Once past the first screw thread, turn the entire main body of the
optical adapter clockwise while pushing gently until it fits into the
positioning cut surface on the scope’s distal end and can be turned
no further.
Nut
Optical adapter
O-ring
Connecting screw thread
First screw thread
Distal end of scope
Second screw thread
Optical adapter positioning cut surface
Nut
Optical adapter
O-ring
Connecting screw thread
First screw thread
Distal end of scope
Optical adapter positioning groove
Second screw thread
Optical adapter
Optical adapter main body
To Next Page
Loading...
