Olympus IPLEX NX IV9675N - Measurement

94
7-4 Measurement
While displaying the live/freeze screen, tap the [MEASURE] button.
The measurement screen is displayed.
Specify the reference points.
Place the cursor on each extremity of an object with a known length in the observed
image and tap the [ENTER] button.
Set the reference length.
When the reference length input message is displayed, enter the known length by tapping
the up/down/left/right button (
the up/down/left/right button (
) and tap the [ENTER] button to fix it.
Specify the measurement points.
Place the cursor on each extremity of the measurement object and tap the [ENTER] button
to measure its length.
Record the measurement results.
Press the [RECORD] button to record the image with the measurement results.
Exit from measurement.
Tap the [LIVE] button to display the measurement exit confirmation dialog. And select
<YES> to exit from scaler measurement. Select <NO> to return to the measurement screen.
Or select <EXIT MEASUREMENT> in the measurement menu screen and select
<EXECUTE> to exit the scaler measurement and return to the screen before the scaler
measurement is activated. Select <CANCEL> to return to the measurement screen.
1
2
3
4
55
6