Olympus IPLEX NX IV9675N - Operating the Instrument; ZOOM] Lever; VIEW] Button; MENU] Button

46
4-3 Operating the instrument
This instrument can be operated by the touch panel, buttons and joysticks of the LCD unit and
the remote control unit (optional).
For operations using the LCD unit and the remote control unit, see the following table.
Touch panel of LCD
unit
Remote control unit Function
(No applicable button) Shows the touch panel button.
(No applicable button) Hides the touch panel button.
[MENU] button Shows/hides the menu screen.
tap
[LIVE] button
short-press
Returns to the live screen.
long-tap
[LIVE] button
long-press
Changes the brightness adjustment
between Auto mode and Manual mode.
[VIEW] button
Displays the image recorded.
(Tapping this button while the view screen is
displayed will show the live screen.)
[THUMBNAIL ]button
Displays the thumbnail screen.
(Tapping this button while the thumbnail
screen is displayed will show the live
screen.)
[SPOT RANGING] button
Starts/exits the spot ranging function.
(Tapping this button while the spot
ranging screen is displayed will show
the live screen.)
[MEAS/ENTER] joystick
(Press the button.)
Starts the stereo measurement function.
[ZOOM] lever
Uses the zoom function.
enlarges the image and reduces
the image.
[BRT] lever
Changes the brightness setting.
increases the brightness level
and
decreases the brightness
level.
Tapping
on the thumbnail screen
will put a mark on the image being
selected, and tapping
will put
marks on all thumbnail images.
[MEAS/ENTER] joystick
(Press the button.)
Decide the menu, etc.