86
3
Measurement method types
The measurement method selection screen is displayed immediately after starting the stereo
measurement or when <METHOD> is selected in the measurement menu screen.
The following four measurement methods are available.
This mode allows for measuring the distance between two specified measurement points.
Place the cursor on both ends of the measurement area you want to measure and tap the
[ENTER] button to specify the measurement points.
This mode allows for measuring the distance from a measurement point to the reference line
specified by two reference points and also displaying the offset line parallel to the reference
line passing through the measurement point.
<Distance>
<Point to Line>
<Distance>
Distance between
measurement points
Measurement point
Measurement
point
<Point to Line>
Perpendicular
distance
Measurement
point
Reference
point
Reference
line
Offset line
To Next Page
Loading...
