EasyManua.ls Logo

Olympus IPLEX NX IV9675N - [MEAS;ENTER] Joystick; [FREEZE] Button; [RECORD] Button

Olympus IPLEX NX IV9675N
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
IPLEX NX
Touch panel of LCD
unit
Remote control unit Function
[MEAS/ENTER] joystick
(Joystick operation)
Selects the menu or moves the cursor.
Switches the save destination folder of
the image on the live screen.
Switches the selected image on the
thumbnail screen.
displays the last image and displays
the next image on the view screen.
Buttons and joystick of LCD unit
Remote
control unit
Function
[ANGLE/LOCK] joystick
(Press the button.)
Locks the angulation operation of the
distal end of the insertion tube.
Pressing this button while the angulation
operation is locked will cancel the lock.
[ANGLE/LOCK] joystick
(Joystick operation)
Operates the angulation of the distal
end of the insertion tube.
Pressing this button while the angulation
operation is locked will adjust the
angulation angle finely.
[ROTATE] button
(When the image is displayed in 180
degrees rotation, the indicator upper side
of the button turns ON.)
(No applicable
button)
Rotates the image by 180 degrees.
[ANGLE SEL/CENTER] button
short-press
(If the [ANGLE/LOCK] joystick of the LCD
unit is operable, the indicator upper side
of the button turns ON.
If the [ANGLE/LOCK] joystick of the remote
control unit is operable, the indicator upper
side of the button turns OFF.)
(No applicable
button)
Switches the enable/disable of the
operation with the [ANGLE/LOCK]
joystick of the remote control unit.
[ANGLE SEL/CENTER] button
long-press
[CENT] button Centers the distal end of the insertion tube.
[RECORD] button
short-press
Records the still image.
[RECORD] button
long-press
Records the movie.
[FREEZE] button
Freezes the observation image.
Pressing this button while the image
is frozen will cancel the frozen state.
If multiple functions are assigned to the button, the time to press the button
distinguishes each function. In this manual, the term “press” or “short-press” is
used to indicate pressing a button for a short duration, while “long-press” means
holding down a button approx. one second.
TIP
From this point forward, the descriptions in this instruction manual are on the premise that this
instrument is operated with the LCD unit.

Table of Contents

Related product manuals