26
When performing the observation by placing the
LCD unit on the desk or so, secure the LCD holding
adapter (made by Manfrotto /commercially available)
on the desk or so. Attach the LCD holding bracket to
the LCD holding adapter, and then, attach the LCD
unit to the LCD holding bracket, and secure the LCD
unit.
Remove the LCD unit from the main unit, attach the LCD
unit to the handle of the carrying case and secure it.
· When adjusting the angle of the handle of the
LCD unit, hold the handle of the carrying case
to support the LCD unit firmly.
Otherwise, the carrying case may fall down or
the LCD unit may drop.
· If using the main unit kept in the carrying case,
do not close the cover of the carrying case.
Otherwise, the cables may be caught between
the carrying case and its cover.
When performing the observation by hanging the LCD unit,
hook an S-hook or string, etc. to the handle and hang the
LCD monitor.
Placing the LCD unit only
LCD unit
LCD holding bracket
LCD unit
LCD holding adapter
To Next Page
Loading...
