16
Regions submenus
-> shows ROI toolbar
-> load/save ROI for later use
-> use to copy exact ROI+locations to other images
-> allows to manually move ROI to follow moving/drifting objects
-> converts ROI from overlay to part of image
(obvious)
-> draws series of ROI along a drawn in line (for measurements)
-> use this to create ROI from Object measurement output overlays
Stack submenus
Time and 3D operations
-> looping and speed controls
-> delete a plane at a time
-> set Z calibration; note XY scaling is under Measure menu
-> keep/delete range of planes. Caution: always clear the old ranges before
operations (it remembers garbage)
-> meant for motorized stage (not used presently)
Movie creates a screen version (cannot save); MakeMovie creates AVI
or MOV output that will save as a movie
-> semi-automated way to align objects drifting over time
-> fade/bleach correction (not so good)
->plot intensity change over time (or Z) for line ROI
3D operations
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
To Next Page
Loading...
