II
,.
•
=
=
~
i
38
•
PlavMenu
There are six play modes. You can select
whether
to play by file
or
folder,
or
all files
stored
in
the recorder.
Setting:
[File]:
Stop
after
playing back the
current
file.
[File
Repeat]:
Play the current file repeatedly.
[Folder]:
Play files continuously in the current
folder
until the last
file
and
stop.
[Folder
Repeat]:
Play all files in the current
folder
continuously.
[All]:
Play all files in the selected
memory
continuously and stop.
[All
Repeat]: Play all files
in
the selected memory continuously
and
repeatedly.
In
[File] mode, when the recorder comes to the end of the last file
in
the folder,
[End]
flashes for two seconds on the display and the recorder stops at the start
of
the last file.
In
[Folder) mode, when the recorder comes to the end
of
the lastfile
in
the folder,
[End]
flashes
for
two
seconds
on
the
display
and
the
recorder
stops
at
the
start
of the
first
file
in
the folder.
In
[All) mode, after playing the last file in the folder, the recorder will startplaying from the
first file in the next folder. When it comes to the end ofthe last file
in
the recorder,
[End]
flashes for two seconds on the display and the recorder stops at the start
of
the first file
in
the
recorder.
You
can enjoy the reverberant sound of various space sizes such as from
the recording studio to the dome.
Setting:
[Normal]:
Disables the reverb function. Select this when playing
back
original
sounds as they are.
[Studio]
[Club]
[Hall]
[Dome]:
Select
the preferred acoustical
environment.
When playing back
WAV
format files using these playback results, the
sampling
rate
and bit rate will be converted
downward
from 96
kHz
to
48
kHz and 24 bit to
16
bit,
respectively.
This function
is
only available during playback. This recorder cannot perform
recording by using the playback results.
When
you
adjust the various sound quality settings related
to
playback
on
the
recorder, the audio
output
signal sent
out
from the
EAR
jack will
change
as well.
This recorder is equipped with
"EUPHONY
MOBILE",
the latest
in
surround
sound
systems which combines bandwidth correction, expansion technology, and virtual
acoustical source processing technology.
In
addition
to
its natural, expansive feel, the
recorder
is
equipped with the exceptional feature wherein listeners are
less
prone
to
developing an compressed or closed-in feel, or
to
growing tired over extended listening.
On top of this, listeners
are
less prone to developing an oppressed or closed-in feel, or
to growing tired over extended listening. Level adjustments of the
[EUPHONY]
setting
can be set
to
four stages according
to
preference.
Setting:
[Normal]:
Disables this function.
Select
this when playing back
original
sounds
as they are.
[Natural]:
This
mode
achieves natural bandwidth correction and acoustical
field expansion.
[Wide]: This mode has an even
more
expansive feel.
[Power]: This mode focuses more on lower sound registers.
When playing back WAVformatfiles using these playback results, the sampling rate and bit
rate will be converted downward from 96 kHz to 48 kHz and
24
bit
to
16
bit,
respectively.
This function
is
only available during playback. This recorder
cannot
perform
recording by using the playback results.
When
you adjust
the
various
sound quality settings related to
playback
on
the
recorder, the audio
output
signal sent
out
from the
EAR
jack will
change
as well.
To Next Page
Loading...
