•
lCD/Sound
Menu
•
Memorv
Menu
-
The display will remain lit for about
10
(Initial setting) seconds when a button
on
the
recorder
is
pressed.
Selting:
[5
seconds)
[10
seconds]
[30
seconds)
[60
seconds]
[Always
on]:
Set the length of time that the backlight will remain lit.
[Off]:
Disables this function. The backlight will not light
up.
Display contrast can be adjusted
in
12
levels.
Setting:
You
can adjust the LCD display contrast level from
[01J
to [12].
You
can set it so the LED indicator light does not turn on.
Selting:
[OnJ: LED light will be set.
[Off]:
Disables this function. LED light will
be
cancelled.
When
an
SO
Card is inserted you can select
to
record to eitherthe built-in flash memory
or to the
SO
Card
(w
P.14).
Setting:
[Built-in
Memory):
Built-in flash memory.
[SO Card):
SO
Card.
When attempting to perform operations such
as
rewriting the contents ofan
SO
Card
in
cases where the card has been write protected, [SO Card
Locked]
will appear.
The playback operation can
be
performed, but the write protection must first be
turned
off
when overwriting the contents on the card
(oT
P.15).
The recordable capacity remaining and overall capacity of the recording media can
seen
from
the
menu
screen.
When no
SO
Card is inserted only information for the built-in flash memory will
seen.
The domain area which uses the administrative files which
the
recorder uses
is
included
in
the remaining capacity for the recording media. For
SO
cards
in
particular,
in
addition
to
this
administrative
domain
the
administrative
domain
area
for
the
SO
card is added
in
as well. Owing
to
this, the remaining capacity wili be displayed as
less than the card's specified capacity, yet this is not abnormal.
•
.-
CD
=
=
i.
i
39
To Next Page
Loading...
