Olympus OM-1 - Page 70

3. Disassembly of the shutter
D-4
(Lower side of the body)
1) Remove CA8867 (Shaft).
Then will come off:
CA8872 (Spring)
XCA8865 (Lever)
2) Remove CA8864 (Shaft).
Then will come off:
CA8862 a b (Plate)
NW1.8 - 336PO
3) Remove CA8826 (Spring) from CA8824 (Lever) and take off CA9052
(Screw).
Then will come off:
CA8826 (Spring)
CA8824 (Lever)
CA8821 (Lever)
Caution: XCA8820 (Shaft)
4) Remove CA8848 (Shaft).
Then will come off:
CA8849 (Spring)
CA8842 (Lever)
CA8847 (Holder)
XCA8845 (Lever)
NW1.8 - 240PO
5) Remove CA8846 (Shaft).
Then will come off:
CA8844 a - c (Lever)
NW1.8 - 240PO
p./ icmcntia.org/HarcIware