To Next PageTo Next PageWhy is the image blurry, not sharp, or has insufficient contrast on my Olympus Microscope?
If the visibility of the observed image is poor, the image isn't sharp, or the contrast is insufficient on your Olympus Microscope, it could be due to several reasons: * The objective is tilted: Screw it in correctly until it stops. * The objective is dirty: Clean it thoroughly.
What to do if the left and right fields of view don't coincide on my Olympus Microscope?
If the left and right fields of view do not coincide in your Olympus Microscope, it could be because: * The interpupillary distance is adjusted improperly: Adjust it correctly. * The diopter is adjusted incorrectly: Adjust it correctly. * The left and right eyepieces are different: Use a pair of matched eyepieces.
Why is the field of view partially obscured or unevenly illuminated on my Olympus SZX10 Microscope?
If the field of view is obscured partially or illuminated unevenly on your Olympus Microscope, consider the following: * The aperture iris diaphragm is stopped down excessively: Open the aperture iris diaphragm. * The trinocular observation tube and/or intermediate attachments are installed improperly: Mount them properly. * The light path selector knob is in an intermediate position: Set it correctly to the desired position.
What to do if my Olympus Microscope body drops spontaneously during observation?
If the microscope body drops spontaneously, causing the focusing to be deviated during observation with your Olympus Microscope, it may be due to: * The rotation tension of the coarse focus adjustment knob is set too low: Increase the rotation tension to an optimum level. * The microscope body dropped spontaneously because the weight exceeded 10 kg: Use a focusing assembly withstanding heavy loads. (SZX2-FOF: 2.7 to 15 kg. SZX2-FOFH: 8 to 25 kg.)
Why do details of the observed image appear solid on my Olympus SZX10 Microscope?
If the details of the observed image appear solid on your Olympus Microscope, it is possible that the aperture iris diaphragm is stopped down excessively. To resolve this, open the aperture to a proper diameter.
What to do if the monitor image is cut off partially on my Olympus Microscope?
If the monitor image is cut off partially on your Olympus Microscope, it is possible that the light path selector knob is pulled out incompletely. Ensure that you pull it out all the way.
General| Type | Stereo Microscope |
|---|---|
| Field Number | 22 |
| Magnification Range | 7x to 90x |
| Working Distance | Up to 110 mm |
| Illumination | LED illumination, transmitted and reflected |
| Eyepiece | 10x |
| Stand Type | Various stand options available |
| Weight | Varies depending on configuration |
| Optical System | Greenough optical system |
Crucial safety guidelines and warnings for operating the microscope to prevent accidents and damage.
Detailed explanation of zooming knob, coarse/fine focus knobs, and their adjustments.
Step-by-step guide for placing a specimen, adjusting interpupillary distance, and focusing.
Guidance on adjusting the coarse focus knob tension and other focusing mechanisms.
Step-by-step instructions for installing the pillar onto the microscope base.
Procedure for securely attaching the microscope body to the focusing assembly.
