25
2
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens (☞ P. 42).
2
Press the OK or 9 button.
The “Rec Menu” screen opens.
3
Press the + or
–
button to choose
“Mic Sense”.
4
Press the OK or 9 button.
The microphone sensitivity setup process
begins.
5
Press the + or
–
button to choose
between “Conf” and “Dict”.
Conf: High-sensitivity mode that records
sounds in all directions.
Dict: Low-sensitivity mode suited for
dictation.
6
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Rec Menu” screen.
7
Press the STOP button to close the
menu.
a Microphone sensitivity indicator
2
1
3
5
4
7
6
D i c
Mic Sense
t
C o n f
Rec Mode
Mic Sense
VCVA
Low Cut Filter
e c M e n uR
120
1
1
H 27M 53S
20
HQ
00
M
00
S
a
Microphone Sensitivity (Mic Sense)
Microphone sensitivity is adjustable to meet recording needs.
..................................................................................................................................................
Note
• When the speaker’s voice is to be recorded clearly, set to Dict (dictation) mode and move the built-in
stereo microphone close to the speaker’s mouth (5 to 10 cm / 2 to 4 inches) and record.
Microphone Sensitivity (Mic Sense)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
