Olympus WS-331M - System Sounds (Beep)

87
5
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens (☞ P. 42, P. 70).
2
Press the + or
–
button to choose
“Beep & Display”.
3
Press the OK or 9 button.
The “Beep & Display” screen opens.
4
Press the OK or 9 button.
The system sound setup process begins.
5
Press the + or
–
button to choose
between “On” and “Off”.
On: System sounds are enabled.
Off: System sounds are disabled.
6
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Beep & Display” screen.
7
Press the STOP button to close the
menu.
2
1
3,4
5
7
6
Rec Menu
Play Menu
Beep & Display
Sub Menu
e n uM
Beep
Backlight
Contrast
LED
Beep & Display
On
O
ff
e e pB
System Sounds (Beep)
The recorder beeps to alert you to button operations or warn you of errors. System sounds
may be turned off.
System Sounds (Beep)