Olympus WS-331M - Set the Low Cut Filter (Low Cut Filter)

26
2
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens (☞ P. 42).
2
Press the OK or 9 button.
The “Rec Menu” screen opens.
3
Press the + or
–
button to choose
“Low Cut Filter”.
4
Press the OK or 9 button.
The Low Cut Filter setup process begins.
5
Press the + or
–
button to choose
between “On” and “Off”.
On: Low Cut Filter will be turned on.
Off: Low Cut Filter will be canceled.
6
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Rec Menu” screen.
7
Press the STOP button to close the
menu.
If it is set to “On”, will appear on the
display.
a Low Cut Filter indicator
The recorder has a Low Cut Filter function to minimize low-frequency sounds and record
voices more clearly. This function can reduce noise from air conditioners, projectors and
other similar noises.
Set the Low Cut Filter (Low Cut Filter)
2
1
3
5
4
On
O
ff
Low Cut Filter
Rec Mode
Mic Sense
VCVA
Low Cut Filter
e c M e n uR
120 1
1
H 27M 53S
20
HQ
00
M
00
S
a
Set the Low Cut Filter (Lo
w Cut Filter)
7
6