O.M.A.C. s.r.l.
Via Giovanni Falcone, 8 42048 Rubiera (RE) - Italy Tel.0522/629371 - 629923 Fax 0522/628980
Rev.4 del 01/2011 O.M.A.C. s.r.l.
SUMMARY
3.4.1.2.1 Internal cleaning :CIP (Cleaning In Place) / SIP (Sterilising In Place) Chap.3-pag.10
3.4.1.2.2 Internal cleaning: manual cleaning Chap.3-pag.11
3.4.2 LDPU for chemical use Chap.3-pag.12
3.4.2.1 External cleaning instructions Chap.3-pag.12
3.4.2.2 Internal cleaning instructions Chap.3-pag.12
3.4.2.2.1 Internal cleaning: CIP (Cleaning In Place) Chap.3-pag.13
3.4.2.2.2 Internal cleaning: manual cleaning Chap.3-pag.13
3.5 Connection to energy sources Chap.3-pag.14
3.5.1 Connection to electrical system Chap.3-pag.14
3.5.2 Connection to the hydraulic system Chap.3-pag.14
3.5.3 Connection to the pneumatic system Chap.3-pag.15
3.6 Use of lubricants Chap.3-pag.16
3.7 Installation and pre-start check: operation test Chap.3-pag.16
CHAPTER 4: USE OF THE B SERIES LDPU Chap.4-pag.1
4.1 Inteded use Chap.4-pag.1
4.2 Controls Chap.4-pag.2
4.3 LDPU volumetric capacity adjustment methods Chap.4-pag.3
4.3.1 Adjustment of the volumetric capacity with the inverter Chap.4-pag.3
4.3.2 Adjustment of the volumetric capacity via mechanical speed controller Chap.4-pag.3
4.4 Work cycle description Chap.4-pag.4
4.5 Cycle start instructions Chap.4-pag.4
4.5.1 Preliminary operations: check list Chap.4-pag.4
4.5.2 First start-up Chap.4-pag.5
4.6 Stopping instructions Chap.4-pag.5
4.7 Instructions for restarting after a stop Chap.4-pag.5
4.8 Switch-off Chap.4-pag.5
4.9 Emptying Chap.4-pag.5
4.10 Residual risks Chap.4-pag.6
4.11 Dangers generated by use Chap.4-pag.6
4.12 Prohibited use Chap.4-pag.6
4.13 Management of emergency situations Chap.4-pag.6
CHAPTER 5: MAINTENANCE OF THE B SERIES LDPU Chap.5-pag.1
5.1 Troubleshooting and solving problems Chap.5-pag.1
5.2 Instruction for carrying out checks Chap.5-pag.4
5.2.1 Daily checks Chap.5-pag.5
5.2.2 Weekly checks Chap.5-pag.5
5.2.3 Six monthly checks Chap.5-pag.5
5.3 Periodic check of the safety and emergency devices Chap.5-pag.5
5.4 Indication of dangerous temperatures Chap.5-pag.5
5.5 Oils present Chap.5-pag.5
5.6 Test and checks Chap.5-pag.5
5.6.1 Electrical checks Chap.5-pag.5
5.6.2 Single mechanical seals Chap.5-pag.5
5.6.3 Mechanical seals with fl ushing Chap.5-pag.6
5.6.4 Mechanical seals balancing Chap.5-pag.6
5.6.5 Packing seals Chap.5-pag.6
5.7 Disassembly and assembly operations of B100 size pump Chap.5-pag.7
5.7.1 Disassembly of the pumping body Chap.5-pag.8
5.7.2 Assembly of the pumping body Chap.5-pag.8
5.7.3 Disassembly of the bearings box Chap.5-pag.9
5.7.4 Assembly of the bearings box Chap.5-pag.9
5.7.5 Disassembly of the lip seals Chap.5-pag.10
5.7.6 Assembly of the lip seals Chap.5-pag.10
5.8 Disassembly and assembly operations of B1 B2 B3 B4 B470 B490 size pump Chap.5-pag.11
5.8.1 Disassembly of the pumping body Chap.5-pag.13
5.8.2 Assembly of the pumping body Chap.5-pag.13
5.8.3 Disassembly of the bearings box Chap.5-pag.13
5.8.4 Assembly of the bearings box Chap.5-pag.14
5.9 Disassembly and assembly operations of B550 B660 B680 size pump Chap.5-pag.16
5.9.1 Disassembly of the pumping body Chap.5-pag.18
5.9.2 Assembly of the pumping body Chap.5-pag.18
5.9.3 Disassembly of the bearings box Chap.5-pag.19
5.9.4 Assembly of the bearings box Chap.5-pag.19
5.10 Post maintenance check Chap.5-pag.20
CHAPTER 6: DECOMMISSIONING OF THE B SERIES LDPU Chap.6-pag.1
6.1 Disconnection from energy sources Chap.6-pag.1
To Next Page
Loading...
