OMC RE20 - Button and Function

28
Installation
,
O
p
eration and Maintenance Manual ManRE20en Rev.06/2022
OMC S.p.A: Via G. Galilei, 18 - 20060 - Cassina de Pecchi (MI) - ITALY - www.omcvalves.com - Tel.: (+39) 02.95.28.468
8.2.2 Button and function
Positioner has 4 buttons, and they enable to perform various functions.
Fig. 8-2:
Buttons Function
UP
Used to navigate to each menu at the same level or to
increase the value of the selected parameter.
DOWN
Used to navigate to each menu at the same level in reverse
order of UP button or to decrease the value of the selected
parameter.
ENTER
Use to select the current menu or function, or to store the
value of a modified parameter.
ESC Used go directly to parent menu from current menu.