Omega CN16Pt - 1.2 Using This Manual

PLATINUM
TM
Series User’s Guide
8
Introduction
1.2 Using This Manual
This initial section of the manual will cover the back panel connections and wiring instructions. A quick
overview of how to navigate the PLATINUM
TM
Series menu structure follows in Section 2. This is
followed in Section 3 by the complete PLATINUM
TM
Series menu tree. Remember, not all commands and
parameters in that menu tree will show up on your unit, as those that are not available with your
configuration are automatically hidden. Repetitive menu structures are highlighted in gray and only
shown once but are used multiple times; examples include scaling process inputs for the different
process input ranges, setting up the data communications protocol for each of the communications
channels, configuration for multiple outputs, etc.
This manual is optimized for online use. Therefore, the blue entries in the Section 2 menu tree are
hyperlinks that take you straight to the corresponding reference section entry when you click on them.
The Reference Section—encompassing Initialization Mode in Section 4, Programming Mode in Section 5,
and Operating Mode in Section 6—will provide more detail on what parameter and command choices
you have, how they operate, and why you might want to choose a specific value. There are also blue
cross-references embedded in the Reference Section (the blue section headers however, are not
hyperlinks). In addition, the Table of Contents on pages 3 through 6 is hyperlinked to all of the entries
throughout the manual that are listed in it.
Omega Engineering | www.omega.com