Omega DP41-S - Page 99

9-3
Meter Function Menus
9
MENU MIN/MAX*
BUTTON BUTTON
MAIN MENU SUB MENU CONDITION
“L2 CNF”: LOCKOUT CONFIGURATION #2
“L2C.1=0” RDG.CNF (scale/offset method and display
features) may be chosen.
“L2C.1=1” RDG.CNF (scale/offset method and display
features) is locked out.
“L2C.2=0” Either RDG SC (computed input-to-display
scale factor)
or
RD.SC.OF (two data points, which
determine the reading scale/offset) may be
entered.
“L2C.2=1” Either RDG SC (computed input-to-display
scale factor)
or
RD.SC.OF (two data points, which
determine the reading scale/offset) is
locked out.
“L2C.3=0” RDG OF (offset computed in display digits)
may be entered.
“L2C.3=1” RDG OF (offset computed in display digits)
is locked out.
“L2C.4=0
” INP.CNF (meter rates, front-end features,
prelinearizing scale/offset) may be chosen.
“L2C.4=1” INP.CNF (meter rates, front-end features,
prelinearizing scale/offset) may not be
locked out.
“L2C.5=0” IN.SC.OF (two data points for additional
scale/offset) may be entered.
“L2C.5=1” IN.SC.OF (two data points for additional
scale/offset) may not be entered.
“L2C.6=0” DEC PT (decimal-point location) may be
chosen
“L2C.6=1” DEC PT (decimal-point location) may not
be chosen.
continued next page