Omron 3G3RX-V1 Series - Page 28

7．Connection Procedure
4
Select Communications Setup
from the Controller Menu.
5
The Communications Setup
Dialog Box is displayed.
Select the Direct connection via
USB Option in the Connection
Type Field.
Click the OK Button.
6
Select Online from the
Controller Menu.
*If the dialog on the right is
displayed, the model or version
of the Controller does not
match that of the project file.
Check the model and version of
the Controller and the device
settings of the project file,
return to step 1 and try again.
Click the OK Button to close the
dialog box.
25