Omron B7A - Page 117

B7A
B7A
115
2. The 16-point B7A-T6A j and 16-point B7A-T6B j are dif ferent from each other in terminal configuration. Refer to page 25 for de -
tails.
3. N-channel
MOS-FET open drain output
4. P-channel MOS-FET open drain output
Modular Models
Appearance Model I/O
classification
I/O
configuration
I/O delay time
(typical)
Error processing
(see note)
Approved
standards
B7A-T6D2 Input TTL input Normal speed
19.2 ms
---
---
B7A-T6D7 High speed 3 ms ---
B7A-R6A52 Output
NPN open
collector
50 A/ i t
Normal speed
19.2 ms
HOLD/LOAD OFF
selected by wiring
B7A-R6A57
50 mA/point
High speed 3 ms
yg
B7A-T6D7-D Input NPN input High speed 3 ms --- ---
B7AH-T6D3 Input
CMOS input
Normal speed
19.2 ms
---
---
B7AH-T6D8 Input High speed 3 ms ---
B7A-R6A57-D Output NPN open
collector
50 mA/point
High speed 3 ms HOLD/LOAD OFF
selected by wiring
---
B7AH-R6D53 Output
CMOS output
2 mA/point
Normal speed
19.2 ms
HOLD/LOAD OFF
selected by wiring
---
B7AH-R6D58 Output High speed 3 ms
Note: HOLD: The previous output condition will be on hold when an error results.
LOAD OFF: All outputs will be OFF when an error results.
Terminals with PLC Connector
16-point Terminal Models
Appearance Model I/O
classification
I/O
configuration
I/O delay time
(typical)
Error
processing
Approved
standards
B7A-T6E3 Input NPN compatible Normal speed
19.2 ms
---
U, C, CE
B7A-T6E8 High speed 3 ms ---
B7A-R6A13 Output
NPN open
collector
50 A/ i t
Normal speed
19.2 ms
HOLD
B7A-R6A33
50 mA/point
LOAD OFF
B7A-R6A18 High speed 3 ms HOLD
B7A-R6A38 LOAD OFF
32-point Terminal Models
Appearance Model I/O
classification
I/O
configuration
I/O delay time
(typical)
Error
processing
Approved
standards
B7A-T3E3 Input NPN compatible Normal speed
19.2 ms
---
U, C, CE
B7A-T3E8 High speed 3 ms ---
B7A-R3A13 Output
NPN open
collector
50 A/ i t
Normal speed
19.2 ms
HOLD
B7A-R3A33
50 mA/point
LOAD OFF
B7A-R3A18 High speed 3 ms HOLD
B7A-R3A38 LOAD OFF