Omron BN75R - Page 25

2.Installation and connection
13
(4) Usethe8includedearmountingat-headscrews(2setsof4screws)tosecurelyfastenthe
ears to the left and right sides of the UPS.
④
⑤
⑤
(5) Place the UPS on the rack rails and push it completely into the rack
⑤
, and attach the 2
includedearxingnutstotherackaligningthemwiththeholepositionsontheears.
⑥
Then,
useearxingscrews(M6)tosecurelyfastenthemtotherack.
⑦
⑧
⑥
Push in
completely
Ear fixing nuts
⑦
Always use the rack rails.
The support angles cannot be attached to special EIA/JIS racks.