Omron BN75R User Manual

BN75R/BN150R/BN300R
4
32
Menu Description
Setting Local Setting Language Set the language to be displayed on
the LCD.
LCD Setting Change the contrast of the LCD.
LCD Auto off Set the amount of time after which the
LCD turns off automatically.
LCD Test Check that the LCD and LEDs light up.
Audible Alarm Set the beeper status.
Calendar Setting Set the calendar information for the
UPS.
UPS Installation Set the date you started using the UPS.
UPS Life Count Set the UPS life counter status.
Menu Type Select the menu to be displayed.
"Standard" displays frequently used
items only.
In/Out Settings Output Voltage
☆
Check the output voltage.
AC I/P Sensitivity
☆
Set the input sensitivity.
Input Plug
☆
Set this when replacing the input plug.
ECO Mode
☆
Set whether to enable ECO Mode.
Frequency Range
☆
Switch the frequency range mode.
Transfer Sensitivity
☆
Set the sensitivity at which to switch to
Battery Mode.
Boot Settings Auto Reboot Set auto restart from power failure.
Cold Start Set whether to enable the cold start
function that can start up the UPS even
when there is no AC input.
Reboot Delay Time Set the delay time for recovery from
power failure.
Load Segments Set this when you want the delay time
for restarting receptacle group B and C
to be longer than that for group A.
Reboot Batt.level Set the amount of battery charge for
restarting the UPS.
Auto Reboot Mode Set the mode for rebooting.
Power SW Off Mode Switch the operating mode of the power
switch.
Battery Settings Function Test Set the timing at which to execute the
self-diagnostic test.
Batt.life Counter Setwhethertobenotiedofthebattery
life.
Battery Installation Set the date you replaced the battery.
Max.backupTime
☆
Set the output of the UPS to stop after
aspeciedamountoftime.
Low Battery Warning
☆
Set the level at which to detect low
battery.

Omron BN75R Specifications

General

Brand	Omron
Model	BN75R
Category	UPS
Language	English