Omron BP5450 User Manual

16
2. Preparation
2.1 Installing Batteries
1. Push down on
the hook of the
battery cover
and pull
downward.
2. Insert 4 “AA”
batteries as
indicated in the battery compartment.
3. Close the battery cover.
As soon as batteries are correctly installed, the year flashes
on the display.
Refer to sub-section 2.3 to set the date and time manually, or
refer to sub-section 4.1 to pair your monitor to set the date
and time automatically.
Note
•When the “ ” symbol flashes on the display, it is recommended
you replace batteries.
•To replace batteries, turn your monitor off and remove all batteries.
Then replace with 4 new batteries at the same time.
•Replacing batteries will not delete previous readings.
•The supplied batteries may have a shorter life span than new
batteries.
•Disposal of used batteries should be carried out in accordance with
local regulations.

Omron BP5450 Specifications

General

Model	BP5450
Type	Upper Arm Blood Pressure Monitor
Bluetooth Connectivity	Yes
Display	LCD
Irregular Heartbeat Detection	Yes
Average Reading	Yes
Hypertension Indicator	Yes
Measurement Method	Oscillometric
Cuff Size	22-42 cm
Memory Storage	200 Readings (100 per user)
Power Source	4 AA batteries or AC adapter