Omron BP5450 User Manual

4. Using Your Monitor with a Smart Device
33
EN
4.3 Disabling/Enabling Bluetooth
Warning
• This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT use
this product in locations where RF is restricted, such as on an aircraft or in
hospitals. Turn off the Bluetooth feature in this monitor and remove batteries
when in RF restricted areas. For further information on potential restrictions
refer to documentation on the Bluetooth usage by the FCC/ISED.
Bluetooth is enabled as default.
1. When your monitor is off, press and hold the
button (rear surface of the monitor) for more
than 10 seconds.
“oFF” flashes 3 times.
2. Press the [START/STOP] button to turn your
monitor off.
Note
• To enable Bluetooth, press and hold the button for more
than 2 seconds. “on” appears on the display.
• Your monitor automatically turns off 2 minutes after the
completion.
• When Bluetooth is disabled, the “ ” symbol appears.

Omron BP5450 Specifications

General

Model	BP5450
Type	Upper Arm Blood Pressure Monitor
Bluetooth Connectivity	Yes
Display	LCD
Irregular Heartbeat Detection	Yes
Average Reading	Yes
Hypertension Indicator	Yes
Measurement Method	Oscillometric
Cuff Size	22-42 cm
Memory Storage	200 Readings (100 per user)
Power Source	4 AA batteries or AC adapter