Omron BP5450 User Manual

40
6. Other Settings
5. Press the [START/STOP] button to turn your
monitor off.
Note
• All readings will be deleted. You cannot partially delete the
readings stored in the memory.
• Your monitor automatically turns off after 2 minutes.
6.2 Restoring Your Monitor to the Default Settings
To delete all the information stored in your monitor, follow the
instructions below. Make sure that your monitor is turned off.
1. While holding the button (rear surface of the
monitor) down, press and hold the [START/
STOP] button for more than 3 seconds.
The display to the right flashes.
2. While holding the button down again, press
and hold the [START/STOP] button for more
than 3 seconds.
The display stops flashing, then your monitor is restored to
the default settings.

Omron BP5450 Specifications

General

Model	BP5450
Type	Upper Arm Blood Pressure Monitor
Bluetooth Connectivity	Yes
Display	LCD
Irregular Heartbeat Detection	Yes
Average Reading	Yes
Hypertension Indicator	Yes
Measurement Method	Oscillometric
Cuff Size	22-42 cm
Memory Storage	200 Readings (100 per user)
Power Source	4 AA batteries or AC adapter