Omron BP5450 User Manual

30
3. Using Your Monitor without a Smart Device
 Using the Guest Mode
Your monitor stores readings for 2 users in the memory. The guest
mode can be used to take a single measurement for another user.
Note
•No readings are stored in the memory, and the TruRead mode is not
available when the guest mode is selected.
1. Press and hold the
[START/STOP] button
for more than 3
seconds.
The user ID symbol and the date/time display will disappear.
2. Release the [START/STOP] button when the
user ID and date/time display turn off.
The arm cuff automatically starts to inflate.
 If your systolic pressure is more than 210 mmHg
If your systolic pressure is more than 210 mmHg, take a
measurement manually.
After the arm cuff starts to inflate, press and hold the [START/STOP]
button until the monitor inflates 30 to 40 mmHg higher than your
expected systolic pressure.
Note
•Do not inflate above 299 mmHg.
Caution
• Inflating to a higher pressure than necessary may result in bruising of the arm
where the cuff is applied.

Omron BP5450 Specifications

General

Model	BP5450
Type	Upper Arm Blood Pressure Monitor
Bluetooth Connectivity	Yes
Display	LCD
Irregular Heartbeat Detection	Yes
Average Reading	Yes
Hypertension Indicator	Yes
Measurement Method	Oscillometric
Cuff Size	22-42 cm
Memory Storage	200 Readings (100 per user)
Power Source	4 AA batteries or AC adapter