SETTING THE DATE AND TIME
1) Press the button to change.
2) Press the / button to confirm.
• Next setting appears.
1. When the unit is off, press the / button repeatedly until the year flashes
on the display.
Set the monitor to the correct date and time before taking a measurement for the
first time.
2. Set the monitor to the correct date and time.
3. Press the START/STOP button to store the setting.
NOTES: • If the batteries have been removed, the date and time setting will
need to be reset.
•
The date and time can be automatically set when you transfer your
readings to the Omron Wellness App. However, the date and time will
only be set for future measurements taken after the reading that was
transferred, it will not be saved to the reading that was just transferred.
• If the date and time are not set, “-:--” appears during or after
measurement.
• Hold down to advance the digit
rapidly.
Year
Month
Day
Hour
Minute
14
To Next Page
Loading...
